Cleaning & Maintentance Instructions

Clean with warm soapy water or neutral detergent applied to a soft, wet, non-abrasive sponge/cloth, with a movement following the direction of anodising. Rinse and dry with a clean, soft cloth. Microfibre cloths are also suitable for keeping surfaces clean.

Immediately remove any dirt stains as soon as they appear. Avoid steam cleaners. For stubborn stains use warm white vinegar and methylated spirits using a soft cleaning cloth.

Clean with usual glass cleaning products or alcohol diluted with water; in the case of persistent stains, use creamy cleaning products such as Cif, rinsing afterwards.

Do not use abrasive products, metal sponges, products containing acids or acetone-based solvents.

Clean with normal glass cleaner, diluted with water, which cleans without leaving streaks; dry with soft, lint-free cloth. Avoid steam cleaners.

Do not use abrasive, chlorine-containing or excessively aggressive products such as ammonia and acetone.