Accessory Set, for Drawer Locking System, Häfele Matrix Box P

For lock on one side

Art. no. 427.73.388

  • Matrix Box P locking system planning
  • Series drilled holes

    Screw-on position in series drilled holes for drawer set with drawer side height 60 mm

    Screw-on position in series drilled holes for drawer set with drawer side height 92 or 115 mm

    Series drilled holes drilling dimensions

    The screw specifications refer only to the positioning of the drawer runner in the series drilled holes, additional screws must be installed in accordance with the load bearing capacity of the drawer runners.
     
     
     
     
     
     
     
     
     

    Determining the height units (HE) of the central locking bar

    Selecting the right central locking bar

    The sum of panel height units (HE) determines

    • the suitable locking bar
    • in accordance with the series drilled holes

    System 32: 1 height unit HE = 64 mm = 2 x 32 mm

    Example: Min. dimensions for drawers with lock on one side

    1 Top drawer with drawer side height 92 mm, panel height 3 HE (192 mm)

    2 Centre drawers with drawer side height 92 mm, panel height 2 HE (128 mm)

    1 Bottom drawer with drawer side height 92 mm, panel height 2 HE (128 mm)

    A central locking bar with 9 HE is required

     
     

    Example: Min. dimensions for drawers with lock on both sides

    1 Top drawer with drawer side height 92 mm, panel height 3.5 HE (192 mm)

    2 Centre drawers with drawer side height 92 mm, panel height 2 HE (128 mm)

    1 Bottom drawer with drawer side height 92 mm, panel height 2 HE (128 mm)

    A central locking bar with 9.5 HE is required

     
     
     
     
     
     
     
     
     

    Drilling pattern (drawer base panel) for stop clip

    Drilling position on underside of drawer base panel

    A = drawer base panel length

    B = drawer base panel width

    Construction dimensions top drawer

    Lock on one side

    Lock on both sides

    A = panel height can only be adjusted at intervals of 32 mm (0.5 HE)

    B = cylinder position (dimension from lower drilling position of the front fixing bracket to drilling position of the lock), can only be adjusted at intervals of 32 mm (0.5 HE)

    C = panel gap

    Panel height mm

    Drawer side height

    60 mm

    92 mm

    115 mm

    Cylinder position B

    95

    95

    127

    Panel height A with panel gap 3 mm

    189

    189

    221

    Number of height units HE

    3

    3

    3.5

    Panel height mm

    Drawer side height

    60 mm

    92 mm

    115 mm

    Cylinder position B

    70

    102

    102

    Panel height A with panel gap 3 mm

    189

    221

    221

    Number of height units HE

    3

    3,5

    3.5

     
     
     
     
     

    Construction dimensions centre drawer

    With lock on one or both sides

    A = panel height

    C = panel gap

    Panel height mm

    Drawer side height

    60 mm

    92 mm

    115 mm

    Panel height A with panel gap 3 mm

    125

    125

    157

    Min. number of height units HE

    2

    2

    2.5

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Construction dimensions bottom drawer

    With lock on one or both sides

    A = panel height

    C = panel gap

    Panel height mm

    Drawer side height

    60 mm

    92 mm

    115 mm

    Panel height A with panel gap 3 mm

    125

    125

    157

    Min. number of height units HE

    2

    2

    2.5

    Dimension from the screw-on position of the bottom drawer runner to the cabinet base panel must be at least 67.5 mm.

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Note

    Trial mounting is recommended for differing constructions. The interdependence between the series drilled holes, drawer runners and lock must then be observed during planning. The panel height must be designed at fixed intervals as with series drilled holes.

    Filter

    Complete your selection

    For lock on one side

    Art. no. 427.73.388

    Art. no. 427.73.388
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    SETMin 1
    Article details
    • Lock for Matrix Box P drawer side runner system
    • Surface mounted central locking bar, cabinet processing is not required
    • With lock on one or both sides
    • For use with drawer side sets with 50 kg carrying capacity
    • Locking for both sides - Further information on request
    • Central locking system with anti-tilt safety stop: Prevents simultaneous opening of several drawers
    Matrix Box P accessory for lock on one side

    Application

    To lock a drawer or suite of drawers

    Suitable for

    Matrix Box P drawer side runner system

    Guarantee

    25 years
    Product Features

    Supplied with

    1x Stop clip, right

    1x Central locking system connection, right

    Fixing screws

    Order reference

    Matrix Box P standard drawer set, lock and locking bar to be ordered separately

    Warranty information

    This product is covered under Häfele’s Lifetime Guarantee.

    All products covered under the Häfele Lifetime Guarantee have met our quality standards and have been tested according to the relevant industry certification.

    All products under this guarantee are covered for normal use of the products in a domestic environment - for commercial environments our standard 12 month guarantee would apply.

    For more information go to:

    Services > Customer Support > Häfele Lifetime Guarantee

    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    27-Nov-2020

    Accessory Set, for Drawer Locking System, Häfele Matrix Box P

    For lock on one side For lock on one side

    • This product is covered for 25 years under Häfele's Lifetime Guarantee. T&C's apply.

    • Matrix Box P - The ultimate drawer system

    • Matrix Box P installation and adjustment

    Image may show a similar article, please check product details.