Add a product to your basket by entering the article number:
The type of runner is determined by the design of the running elements, independently of the mounting method.
Guide rails
Plastic rails act as gliding surfaces that support the weight of drawers and their contents.
Roller guided drawer runners
The running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and silent moving rollers.
Ball guided drawer runners
Steel or plastic balls in ball cages are used as the running elements.Groove mounted runners are a subgroup of the ball bearing runners and are characterised by following features:
Concealed runners guided by concealed dynamic runners
Rollers are running elements in running gears.
internal drawer
The drawer front panel is flush or set back from the cabinet side panel.
Front drawer
The front panel of the drawer is overlay mounted to the cabinet side panel.
![]() | ![]() |
internal drawer | Front drawer |
The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.
Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all indicated fixing holes are screw-connected using suitable fastening material.
The load bearing capacity of ball bearing runners that are suitable for side and surface mounting is reduced to about 25% if the ball bearing runners are installed horizontally.
We recommend trial mounting to determine if lowering lies within an acceptable range.
On shelves
at the side | surface mounted | Suspended |
---|---|---|
![]() | ![]() | ![]() |
On drawers
![]() | ![]() | ![]() |
Groove mounted | at the side | surface mounted |
![]() | ||
Concealed |
On cabinets
at the side | Suspended | base panel mounting |
---|---|---|
![]() | ![]() | ![]() |
AL = extension length, L = installation length, SL = drawer length | |
---|---|
![]() | ![]() |
In addition to moving drawers and shelves, individual runners also have special functionality and features:
Self-closing and stay closed feature/hold-in device in closed position
self closing mechanism, Soft and controlled closing mechanism
Tip-on opening
Two-way travel drawer runners
Progressive drive
Stainless steel and aluminium drawer runners
Cabinet and drawer rail separation
![]() | Remove by operating the release lever in the drawer rail. |
Height and tilt adjustments
![]() | ![]() | ![]() |
Sliding and pull out cabinet runners
Order M4 handle screws separately
Installation length: 600 mm, bright nickel plated
Image may show a similar article, please check product details.