Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100

For wooden doors

The product is not / no more available

  • CAD data available.
    Please select an article to view.
  • Technical documents available.
    Please select an article to view.

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100

For wooden doors

  • 2D adjustment

  • Number of concealed hinges per door

    see key

    The values in the diagram are sample measurements for doors up to 600 mm wide.
    With door widths of less than 400 mm, the minimum gap must be provided by trial mounting.
    The doors should not be wider than tall.
    The distance between the hinges of doors with two hinges must be at least as long as the door is wide, if possible even longer.
    In case of heavy loads and high leverage force, an additional hinge of max. 100 mm (dim. X) mounted below the top hinge is recommended.

Image may show a similar article, please check product details.

Product details

Large opening angle provided by external pivot point (axle)
Almost no loss of space inside the cabinet due to the flat design
Cabinet construction or continuous construction possible
With integrated automatic closing spring

  • LGA tested project quality in compliance with DIN EN 15570 test level 3 (80,000 cycles)
    Door installation with slide on (Aximat 100 A) or time saving quick fixing system (Aximat 100 SM)
    2 or 3-dimensional adjustment facility for optimum alignment of the gap pattern
    Full overlay mounting
    Side panel mounting

Material

Zinc alloy

Colour/finish

nickel plated

Opening angle

250°

For door thickness

≤20 mm

Cup drilling depth

11.50 mm

Gap

6.00 mm

Door overlay

13.00 mm

Adjustment facility

Side adjustment: 0 mm, Height adjustment: -2 – 2 mm, 2-dimensional

Installation

Hinge arm fixing into 32 mm series drilled holes

Order reference

Order Hospa Ø 3.5 raised head screws separately for Hospa screw fixing versions

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
19-Jul-2025