Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

Shallow design

    • Technical documents available.
      Please select an article to view.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

    Shallow design

    • see key

      Number of hinges per door
      The values in the diagram are sample measurements for doors up to 600 mm wide.
      With doors widths less than 400 mm, the minimum gap must be determined by trial mounting.
      The door’s width must not exceed its height.
      The distance between door edge and uppermost / lowermost hinge should be no more than 100 mm.
      In case of heavy loads and high leverage force, an additional hinge (dim. X max. 100 mm) mounted below the top hinge is recommended.

    Image may show a similar article, please check product details.

    Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

    Shallow design, Overlay 3.5 mm, 10/13 mm side wall thickness for side/centre panel mounting

    Art. no. 344.75.760

    Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

    Shallow design, Overlay 7.0 mm, 13/19 mm side wall thickness for side/centre panel mounting

    Art. no. 344.75.770
    Product details

    Ø 5 mm axle, 47 mm length
    0 mm door offset from 140° opening angle
    270° opening angle for full overlay, 240° for half overlay
    With catch

    • High quality hinge, tested to ANSI Grade 1 (100,000) cycles
      For thin doors
      For HPL panels

    Maximum project quality in compliance with ANSI grade 1 (100,000 cycles)

    Colour/finish

    nickel

    Mounting

    Mounting in drilled hole, Screw fixing

    For door material

    Laminate

    Concealed hinge version

    Full overlay/half overlay mounting

    Opening angle

    270 °

    Suitable for

    Thin doors

    Material

    Zinc alloy, Hinge arm: Zinc alloy

    Installation

    For corner or centre panel mounting, 6 mm gap

    Door processing for assembly

    Without

    Adjustment facility

    Side adjustment facility: -2 – 1 mm, Height adjustment facility: ±2 mm, Depth adjustment facility: ±1 mm, Height adjustment in cup part via eccentric Depth adjustment via horizontal slots in side component

    For wooden door thickness

    10 – 13 mm

    Side panel thickness

    10 – 13 mm

    Note

    Other colours available on request

    Supplied with

    Hinge
    Fixing material (specially coated self-tapping screws)
    1 twist drill bit ⌀3.3 mm, 50 pieces per packing unit

    Additional information attributes

    Other colours available on request

    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    27-May-2022