Mechanical Codelock Plates, Front and Back, for Existing Mortice Lockcase, Heavy Duty

With tubular mortice latch

Art. no. 912.06.807

Filter

Complete your selection

With tubular mortice latch

Art. no. 912.06.807

Art. no. 912.06.807
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

PCMin 1
Article details
  • For use with internal or external doors
  • Lever handle lock for doors hung on the left or right
  • Code chamber requires that the lever is rotated 45° to re-set the lock for the next user code

Versions:

For use with existing mortice latch or lock

For use with existing mortice latch or lock with either a fixing hole 22 mm below the spindle follower or two horizontal holes either side of the spindle follower (38 mm centres)

When using the front and back plates only, please test your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock cases have a highly sprung latch follower which can defeat the clutch on this lock

With tubular mortice latch included

Material

Steel

Finish

Brushed
Product Features

Supplied with

For use with existing mortice latch or lock version: 1x mechanical front access device, 1x rear access device,3x spindle

With tubular mortice latch version: 1x mechanical front access device, 1x rear access device, 1x tubular mortice latch, 1x strike plate, 3x spindles

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
16-Apr-2021

Mechanical Codelock Plates, Front and Back, for Existing Mortice Lockcase, Heavy Duty

With tubular mortice latch

Image may show a similar article, please check product details.