Mechanical Codelock Plates, Front and Back for Existing Mortice Lockcase Heavy Duty

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Mechanical Codelock Plates, Front and Back for Existing Mortice Lockcase Heavy Duty

Image may show a similar article, please check product details.

Mechanical Codelock Plates, Front and Back for Existing Mortice Lockcase Heavy Duty

For existing mortice latch or lock

Art. no. 912.06.806

Mechanical Codelock Plates, Front and Back for Existing Mortice Lockcase Heavy Duty

With tubular mortice latch

Art. no. 912.06.807
Product details

For use with internal or external doors
Lever handle lock for doors hung on the left or right
Code chamber requires that the lever is rotated 45° to re-set the lock for the next user code

Versions:
For use with existing mortice latch or lockFor use with existing mortice latch or lock with either a fixing hole 22 mm below the spindle follower or two horizontal holes either side of the spindle follower (38 mm centres)
When using the front and back plates only, please test your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock cases have a highly sprung latch follower which can defeat the clutch on this lock
With tubular mortice latch included

Equipped with

Tubular mortice latch

Door operation inside

Lever operated

Access control inside

Free accessibility

Door operation outside

Lever operated

Access control outside

Correct code (standard)

Colour/finish

brushed

For door type

Interior doors, Exterior doors

For number of doors

1-leaf doors

Features

No power supply, no batteries and no wiring required, In order to reset the lock for the next code entry, the lever must be rotated by 45°, Latchbolt, reversible

Material

Steel

Outside backplate height

177 mm

Outside backplate width

47 mm

Outside lock depth

79 mm

Inside backplate height

177 mm

Inside backplate width

47 mm

Inside lock depth

59 mm

Supplied with

For use with existing mortice latch or lock version: 1x mechanical front access device, 1x rear access device, 1x 2 part 8mm spring loaded spindle
With tubular mortice latch version: 1x mechanical front access device, 1x rear access device, 1x tubular mortice latch, 1x strike plate, 3x spindles

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
19-Aug-2022