Mounting Brackets, for Accuride 7957, 9301 and 9308 Drawer Runners

4 bottom and 2 side mount options

  • Information
  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.


    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.


    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.


    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.


    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.


    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.


    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.


    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.


    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options


    On shelves


    Side mounted

    Base mounted I

    Base mounted II



    On drawers


    Groove mounted

    Side mounted

    Base mounted�




    On cabinets


    Side mounted


    Base panel mounting

    • Catalogue links available.
      Please select an article to view.


    Complete your selection



    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    To receive items as fast as possible, choose 'when available' at checkout.

    Don't know your article number? Select product features below

    422.10.010 7957/9301/9308 Bkt UH 305mm

    4 bottom and 2 side mount options –, Length 305 mm

    422.10.011 7957/9301/9308 Bkt UH 406mm

    4 bottom and 2 side mount options –, Length 406 mm

    422.10.012 7957/9301/9308 Bkt UH 559mm

    4 bottom and 2 side mount options –, Length 559 mm

    422.10.013 7957/9301/9308 Bkt UH 711mm

    4 bottom and 2 side mount options –, Length 711 mm

    Product details
    • 4 bottom and 2 side mount options
    • Unhanded brackets
    • Please see cat. page for mounting illustrations and charts to determine the number of bracket sets required


    For screw fixing, four bracket lengths can be used, either individually or in combination, to cover all runner lengths
    Product Features

    Supplied with


    Order reference

    The fixings included will not fit Accuride 7957 runner, order M6 screws separately

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email:

    Mounting Brackets, for Accuride 7957, 9301 and 9308 Drawer Runners

    4 bottom and 2 side mount options –

    Image may show a similar article, please check product details.