Mounting Brackets, for Accuride 7957, 9301 and 9308 Drawer Runners

4 bottom and 2 side mount options –, Length 559 mm

Art. no. 422.10.012

  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.

     
     
     

    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.

     
     
     
     
     
     

    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.

     
     
     
     
     
     

    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws
     
     
     
     
     
     

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.

     
     
     
     
     

    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.

     
     
     
     
     
     

    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.

     
     
     

    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.

     
     
     

    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.

     
     

    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options

     
     
     

    On shelves

     

    Side mounted

    Base mounted I

    Base mounted II

    Suspended

     
     
     
     
     
     
     
     
     
     

    On drawers

     

    Groove mounted

    Side mounted

    Base mounted�

    Suspended

    Concealed

     
     
     
     
     
     
     
     
     
     

    On cabinets

     

    Side mounted

    Suspended

    Base panel mounting

    4 bottom and 2 side mount options –, Length 559 mm

    Art. no. 422.10.012

    Art. no. 422.10.012
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    PRMin 1
    See Required Products
    Article details
    • 4 bottom and 2 side mount options
    • Unhanded brackets
    • Please see cat. page for mounting illustrations and charts to determine the number of bracket sets required

    Installation

    For screw fixing, four bracket lengths can be used, either individually or in combination, to cover all runner lengths
    Product Features

    Supplied with

    Fixings

    Order reference

    The fixings included will not fit Accuride 7957 runner, order M6 screws separately

    24-Aug-2019

    Mounting Brackets, for Accuride 7957, 9301 and 9308 Drawer Runners

    4 bottom and 2 side mount options – Length 559 mm

    Image may show a similar article, please check product details.

    Note

    Please select an article via the features or article table in order to add it to the basket.