Construction dimensions

Full overlay mounting

Half overlay mounting/twin mounting

Inset mounting

A Hinge arm length

B Hinge arm height

C Door offset

D Distance (mounting plate)

E Distance to cup

F Gap

G Door overlay

J Material thickness

K Cup overlay

L min. distance

Drilling patterns for cup fixing

For screw fixing

Without tools (can also be used for drilling pattern 45/9.5)

Other drilling patterns 45/9.5, 48/6 and 52/5.5 available on request.

Cup dimensions

For all Tiomos hinges except 160° wide angle hinge

160° wide angle hinge

( ) = without tools

( ) = without tools

Installation dimensions for Tiomos 110° aluminium frame hinge

Features

• A hinge system for all door applications
• With or without 3 soft close settings, integrated in hinge arm where it is invisible (optional)
• Mounting door to cabinet without tools using clip system
• 3-dimensional, continuous adjustment facility for door via eccentric (side adjustment) or spiral tech (depth and height adjustment):
  • Side adjustment ±2 mm
  • Depth adjustment from –2/+3 mm
  • Height adjustment ±2.5 mm depending on the mounting plate
• Optimised lever movement and kinematics for particularly easy opening of door and minimum gap dimensions

Timeless design

Adjustment facility of soft close

The damping effect is increased by turning the adjustment lever to the right by 90°.

• For large and heavy doors

Adjustment lever in horizontal position – factory setting

• For standard doors

A more gentle damping effect is achieved by turning the adjustment lever to the left by 90°.

• For small and lightweight doors

Number of concealed hinges per door

The number of concealed hinges per door depends on:

• Door width and height
• Door weight
• Door material

The values in the diagram are sample measurements and refer to a standard door width of 600 mm.

Determine the number of hinges by trial mounting, in case of doubt.

According to the example diagram, four concealed hinges have to be fitted with a door height of 2,000 mm and a door weight of 13 kg.

Construction dimensions

Full overlay mounting

Half overlay mounting/twin mounting

Inset mounting

A Hinge arm length

B Hinge arm height

C Door offset

D Distance (mounting plate)

E Distance to cup

F Gap

G Door overlay

J Material thickness

K Cup overlay

L min. distance

Drilling patterns for cup fixing

For screw fixing

Without tools (can also be used for drilling pattern 45/9.5)

Other drilling patterns 45/9.5, 48/6 and 52/5.5 available on request.

Cup dimensions

For all Tiomos hinges except 160° wide angle hinge

160° wide angle hinge

( ) = without tools

( ) = without tools

Installation dimensions for Tiomos 110° aluminium frame hinge

Tiomos 110°

Tiomos 120°

Tiomos 160°

Tiomos 95° profile door hinge

Tiomos 30°/37°/45° angle hinge. overlay