You will be logged off in
You have been logged off for security reasons.
Please enable browser cookies to explore site features properly.
Sie werden auf die Italienische Seite in Deutscher Sprache weitergeleitet. Klicken Sie auf 'Weiter', um auf die Seite zu wechseln!
Für Sie ist easy link in einer anderen Sprachversion vorgesehen. Klicken Sie auf 'Weiter' um in die gültig Sprachvariante zu wechseln!
Forgot your password?
Add a product to your basket by entering the article number:
Complete your selection
Note:To receive items as fast as possible, choose 'when available' at checkout.
564.10.080 Copper S/B 600x750x10mm
564.10.081 Copper S/B 900x750x10mm
Your search for <strong>null</strong> returned no results.
Installation and modification advice:
Leave on the protective film
Add masking tape to the area to be cut
Draw out the cutting line
Drill a hole to fit a jigsaw blade to cut round
A drop of oil may be needed on the blade
Care should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and corners
Due to coppers natural softness, please be aware that the copper products may have some light scratching underneath the protective plastic covering. We cannot guarantee the copper products will be free from scratches
Storage: We recommend that the plastic coating protecting the copper must be left intact until installation is completed. The copper should always be kept flat prior to fitting and in a warm and moisture free environment
Fitting: Copper worktops should only be fitted in areas that experience normal cooking ranges of temperature and humidity. Particular care should be taken in newly built areas to ensure a stable atmosphere. All windows/doors should be in place, plasterwork fully dried and major works completed prior to installation
Cleaning and care: Chlorides such as bleach or common salt and acids of any kind can damage all grades of copper surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft cloth
To maintain the best appearance of your copper worktops, only use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth
Copper will oxidise over time and will discolour by varying degrees. Most people accept this will happen and like the different patinas that appear (ring marks discolouration etc.). You can always bring copper back to a flat finish by gently rubbing over the surface with wire wool or similar products
Use adhesive to mount upstands and splashbacks to wall. Please order Assembly adhesive, 310 ml tube 003.50.100 separately
Image may show a similar article, please check product details.
Please select an article via the features or article table in order to add it to the basket.
Tel.: 0800 171 2909