• Worldwide
  • Contact us

Threaded Rod and Trim Strip Set, M6, for Door Straightening System, Planofit

For sliding doors

Threaded Rod and Trim Strip Set, M6, for Door Straightening System, Planofit
Image may show a similar article, please check product details.
Don't know your article number? Select product features below

Add to basket

Please select an article

Select the product's features

Select via article table

Finish

Length

Product details

  • Planofit adds rigidity to wooden sliding and hinged doors from 16 mm thick and prevents warping in either direction
  • Ideal for large, heavy doors
  • Can also be used to straight doors that have warped over a period of time
  • Normally two straightening fittings are recommended per door panel
  • 1. The threaded rod is inserted into the trim strip and 2 x U-washers and a hexagonal nut is attached to both sides of it
  • 2. The pre-mounted rod is then inserted into the groove
  • 3. The tensioners are inserted into the boss drilling job and fixed with screws
  • 4. Screw fix the retaining plates
  • 5. The door can now be aligned using the tensioners with an open ended SW10 wrench
  • 6. Position the cover caps on the tensioners

Installation

Recess mounting

Door height

Max. 2400 mm

Door thickness

Min. 16 mm

Threaded rod length

1920 mm

Material

Steel
Plastic

Supplied with

Set consists of 1 x M6 threaded rod 1920 mm long, bright steel, 1 x trim strip, 1863 mm long

Order reference

Fitting set to be ordered separately

Complementary products and accessories

21-Nov-2018

Threaded Rod and Trim Strip Set, M6, for Door Straightening System, Planofit

For sliding doors

Image may show a similar article, please check product details.

Note

Please select an article via the features or article table in order to add it to the basket.