Timber Upstand, Prime Beech

3050 x 100 x 25 mm

Art. no. 564.13.835

Manuals and Videos
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

View 1 Items
Add to wish list

Please login to save products to your wishlist

PC Min. 1
Add to basket

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Timber Upstand, Prime Beech

3050 x 100 x 25 mm

Image may show a similar article, please check product details.

View 1 Items
56413835 product photo

3050 x 100 x 25 mm

Art. no. 564.13.835

Art. no. 564.13.835
selected
Article details

28 mm and 40 mm worktop thicknesses
Hardwood worktops are constructed from finger jointed pieces of kiln dried timber within a width range of 38-41 mm
Raw sanded to 120 grit and ready for finishing
Fabricated hardwood worktops have a silky smooth finish and are virtually maintenance free
The quality is A (top side) / B (underside)
The colour of the wood will change over time, giving a beautiful and matured look
All tops are individually stretch-wrapped. A full pallet consists of a quantity of 20 tops. Boards are available individually, no minimum quantity applies
Store in racks with maximum 500 mm gaps. Store in humidity between 40% and 55% and in normal room temperature of 18°C and 23°C
10 Year limited manufacturer’s warranty
Prices include delivery to a UK mainland trade address

Dim. (W x H)

3050 x 100 mm

Thickness

25.00 mm

Colour/finish

Prime beech

Splashback version

Upstand

Material

Wood

Tolerance

Timber can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between walls

Tolerance is ±2 mm

Upstands should be fixed to the wall and NOT to the worktop

Allow a 3 mm gap between the work surface and upstand, the only connection between upstand and worktops should be silicone sealant, allowing the natural movement of your worktop

Allow a minimum 50 mm from the cut-out to the front edge

Wherever possible, joints in worktops should fall on a carcass end panel, giving added support to a joint

Joints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-out

Allow a minimum of 120 mm between heated cut-outs

Stainless steel sink cut outs to manufacturer’s recommendations

Standard overhang is 35 mm from the carcass front, (not the door)

Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm

Additional information attributes

Heat producing appliances that sit beneath the worktop, must have an aluminium foil membrane placed on the underside of worktop, directly above the appliance

Ensure that pans used on gas hobs are of the correct size

Hob flanges must sit on aluminium thermal insulation around the cut-out, to avoid conducting excess heat and causing cracks in the worktop

Flush mounted, recessed hobs (including induction hobs) are covered under warranty

Complementary products and accessories
Compare selection

Please login to save products to your wishlist

ppic-04092261.jpg
Installation and Care Set, for Apollo® Wood Worktops
564.13.998
View 1 Item
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
19-Apr-2024