Worktop, Solid Surface, Sand, Metis®

15 mm solid surface

Sand

Installation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry out
No specialist tooling required. Can be cut using standard woodworking tools and equipment
As with other slimline surfaces, consideration may be needed with some hobs where the hob depth affects the use of cabinets and drawers beneath
Use of a built in oven beneath a hob may require adaptation to the cabinet in order to allow sufficient clearance between appliances

Although no ‘special’ maintenance is needed we recommend the following is adhered to, as prevention is always better than cure
Routine cleaning:
Specialist cleaning regimes are not required – most dirt and light residue will easily wipe away with a damp cloth and soapy water. The work surface should then be rinsed with clean water and wiped dry Persistent marks can be removed by using a mild-abrasive cleaner, but harsh scouring powders should be avoided. If in doubt, consult our care and maintenance guide
Heat:
Metis® surfaces will withstand heat better than many alternative surface materials
All hot pots, pans and other heat generating devices should always be placed upon a trivet or worktop protector rods, to prevent extreme heat having prolonged and direct contact with the surface
Boiling water and cooking splashes do not harm the surface
Staining:
Unlike marble and granite, Metis® will resist most household chemicals including alcohol and cosmetics
Some chemicals and strong dyes can cause damage and discolouration. If spillage occurs wipe off immediately and rinse area thoroughly
Minor scratching:
Kitchen utensils and crockery (particularly the unglazed bases) can sometimes cause scratches that will be particularly evident on darker colours
The surface can be damaged by scratching or cutting with knives, so the use of a cutting board is essential
Any minor scratches can easily be removed using a grey abrasive pad and other items from the care kit, please refer to the care and maintenance guide