Sliding Track System, Ball Carriage, Accuride 0116

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Sliding Track System, Ball Carriage, Accuride 0116

  • Wall mounting

  • Ceiling installation

  • Floor mounting

  • Installation

    see key

    Supplied in a plastic sleeve because the balls are loose in the ball carriage.
    To prevent the balls from falling out when installing the ball carriage, press the plastic sleeve against the aluminium track, then carefully slide the ball carriage into the aluminium track. Then fit the end stops.

  • Installation

  • Accuride 0116 Sliding Track System – Sliding Track

  • Accuride 0116 Sliding Track System – Kitchen Top Application

  • Accuride 0116 Sliding Track System – Sliding Door Application

Image may show a similar article, please check product details.

Sliding Track System, Ball Carriage, Accuride 0116

With stainless steel ball bearing carriage

Art. no. 421.59.811

Sliding Track System, Ball Carriage, Accuride 0116

With polymer ball bearing carriage

Art. no. 421.59.812
Product details

Track with ball bearing mounted carriage for sliding base units, table tops or display walls
Linear motion guide and ball bearing carriage
Corrosion resistant
Load bearing capacity determined by mounting psotion and number of ball bearing carriages. Please see catalogue page for info.
Weight must be evenly distributed over the rec-circulating ball carriages
The specified values apply to performed test distance of 80,000 m
Fix track as recommended on rigid or flat surface

  • Grease free and smoth running
    Installation: The balls are inserted loosely into the re-circulating ball carriage therefore it is supplied packed in a plastic envelope. In order to avoid losing balls during installation of the re-circulating ball carriage, the plastic envelope must be pressed against the aluminium track and the re-circulating ball carriage must be slid carefully into the aluminium track. Finally install end stops.

Area of application

For sliding objects horizontally, such as cabinets, claddings, display walls etc.

Suitable for

Accuride 0116 linear runners

Thread

M6

Length

177 mm

Width

65 mm

Height

25 mm

Installation

Screw fixing

Installation reference

Supplied in a plastic sleeve as balls are loose in the ball carriage. To prevent the balls from falling out when installing the ball carriage, press the plastic sleeve against the aluminium track, then carefully slide the ball carriage into the aluminium track. Then fit the end stops.

Order reference

Tracks, end stops, M6 fixing screws and accessories to be ordered separately

Complementary products and accessories
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
29-Jun-2022