Worktop Jointing Glue, Solid Surface, Satin Grey, Apollo® Slab Tech

80 ml jointing glue

The product is not / no more available

    • Technical documents available.
      Please select an article to view.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Worktop Jointing Glue, Solid Surface, Satin Grey, Apollo® Slab Tech

    Image may show a similar article, please check product details.

    Product details
    Additional information attributes

    Measuring up:
    Apollo® Slab Tech solid surface can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between walls
    Tolerance is ±2 mm
    Splashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 100 mm
    Allow a minimum 50 mm from the cut-out to the front edge
    Wherever possible, joints in worktops should fall on a carcase end panel, giving added support to a joint
    Joints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-out
    Allow a minimum of 120 mm between heated cut-outs
    Stainless steel sink cut-outs to manufacturer’s recommendations
    Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm
    Installation:
    Some colours have different levels of pigmentation (particles). This may lead to a variation in the aesthetic appearance of the worktop
    Plastering or tiling should be completed after installation
    Regular use of the car and maintenance kit should ensure worktops stay in good condition
    Installation is relatively easy, for either a competent DIY enthusiast or recognised kitchen installer to carry out
    No specialist tool required. Can be cut using normal woodworking routers and blades
    Plan the worktop layout to ensure jonits don’t fall or within 100 mm of cut-outs

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    09-Aug-2022