Worktop, Prime Beech, Apollo® Wood

    • Technical documents available.
      Please select an article to view.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Worktop, Prime Beech, Apollo® Wood

    Image may show a similar article, please check product details.

    Worktop, Prime Beech, Apollo® Wood

    3000 x 640 x 27 mm

    Art. no. 564.10.031

    Worktop, Prime Beech, Apollo® Wood

    3000 x 640 x 40 mm

    Art. no. 564.10.032

    Worktop, Prime Beech, Apollo® Wood

    4000 x 640 x 27 mm

    Art. no. 564.10.035

    Worktop, Prime Beech, Apollo® Wood

    4000 x 640 x 40 mm

    Art. no. 564.10.036

    Worktop, Prime Beech, Apollo® Wood

    2000 x 640 x 40 mm

    Art. no. 564.11.032
    Product details

    Finger jointed in the length and edge glued to provide stability and strength
    Hardwood worktops are constructed from 40 mm wide, finger jointed pieces of kiln dried timber
    Raw sanded to 150 grit and ready for finishing
    The Ultra Work surface sealant included in the Installation and Care Set is required to treat the wood before use, enhancing the natural grain of the wood and giving it a water resistant seal
    Fabricated hardwood worktops have a silky smooth finish and are virtually maintenance free
    The colour of the wood will change over time, giving a beautiful and matured look
    10 Year limited manufacturer’s warranty
    Prices include delivery to a U.K. mainland trade address
    Individually shrink wrapped with instructions included
    Square edge

    Depth

    640 mm

    Worktop version

    Worktop

    Material


    Solid timber

    Edge design

    Square edge

    Colour reference

    Prime Beech
    The colour of the wood will change over time, giving a beautiful and matured look

    Warranty/guarantee

    10 years

    Tolerance

    Tolerance is ±2 mm

    Installation reference

    Finger jointed in the length and edge glued to provide stability and strength
    Hardwood worktops are constructed from 40 mm wide, finger jointed pieces of kiln dried timber
    Raw sanded to 150 grit and ready for finishing
    The Ultra Work surface sealant included in the Installation and Care Set is required to treat the wood before use, enhancing the natural grain of the wood and giving it a water resistant seal
    Fabricated hardwood worktops have a silky smooth finish and are virtually maintenance free
    The colour of the wood will change over time, giving a beautiful and matured look
    10 Year limited manufacturer’s warranty
    Prices include delivery to a U.K. mainland trade address
    Individually shrink wrapped with instructions included
    Square edge

    Note

    Measuring up:
    Apollo® Timber can expand as much as 1mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between walls
    Tolerance is ±2 mm
    Splashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 150 mm
    Upstands should be fixed to the wall and NOT to the worktop
    Allow a 3 mm gap between the work surface and upstand, the only connection between upstand and worktops should be silicone sealant, allow the natural movement of your worktop
    Allow a minimum 50 mm from the cut-out to the front edge
    Wherever possible, joints in worktops should fall on a carcass end panel, giving added support to a joint
    Joints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-out
    Allow a minimum of 120 mm between heated cut-outs
    Stainless steel sink cut outs to manufacturer’s recommendations
    Standard overhang is 35 mm from the carcass front, (not the door)
    Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm

    Order reference

    Wood installation and care set 564.13.998 must be ordered separately

    Additional information attributes

    Measuring up:
    Apollo® Timber can expand as much as 1mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between walls
    Tolerance is ±2 mm
    Splashbacks and upstands over 100 mm high must have a minimum gap from the face to the rear of the hob - electric 50 mm, gas 150 mm
    Upstands should be fixed to the wall and NOT to the worktop
    Allow a 3 mm gap between the work surface and upstand, the only connection between upstand and worktops should be silicone sealant, allow the natural movement of your worktop
    Allow a minimum 50 mm from the cut-out to the front edge
    Wherever possible, joints in worktops should fall on a carcass end panel, giving added support to a joint
    Joints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-out
    Allow a minimum of 120 mm between heated cut-outs
    Stainless steel sink cut outs to manufacturer’s recommendations
    Standard overhang is 35 mm from the carcass front, (not the door)
    Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm

    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    19-Aug-2022