- Home
- Products
- Kitchen, Living & Commercial Solutions
- Drawers
- Drawer Fittings
- Accessory Set, for Drawer Locking System, Häfele Matrix Box P

Accessory Set, for Drawer Locking System, Häfele Matrix Box P
For lock on both sides
Art. no. 427.73.389


- Matrix Box P locking system planning
- the suitable locking bar
- in accordance with the series drilled holes
Series drilled holes
![]() | ![]() | |
Screw-on position in series drilled holes for drawer set with drawer side height 60 mm | ||
![]() | ||
Screw-on position in series drilled holes for drawer set with drawer side height 92 or 115 mm | ||
Series drilled holes drilling dimensions | ||
The screw specifications refer only to the positioning of the drawer runner in the series drilled holes, additional screws must be installed in accordance with the load bearing capacity of the drawer runners. |
Determining the height units (HE) of the central locking bar
|
Drilling pattern (drawer base panel) for stop clip
![]() | Drilling position on underside of drawer base panel A = drawer base panel length B = drawer base panel width |
Construction dimensions top drawer
Lock on one side | Lock on both sides | |||
![]() | ![]() | ![]() | ![]() | |
A = panel height can only be adjusted at intervals of 32 mm (0.5 HE) B = cylinder position (dimension from lower drilling position of the front fixing bracket to drilling position of the lock), can only be adjusted at intervals of 32 mm (0.5 HE) C = panel gap |
Panel height mm | |||
---|---|---|---|
Drawer side height | 60 mm | 92 mm | 115 mm |
Cylinder position B | 95 | 95 | 127 |
Panel height A with panel gap 3 mm | 189 | 189 | 221 |
Number of height units HE | 3 | 3 | 3.5 |
Panel height mm | |||
---|---|---|---|
Drawer side height | 60 mm | 92 mm | 115 mm |
Cylinder position B | 70 | 102 | 102 |
Panel height A with panel gap 3 mm | 189 | 221 | 221 |
Number of height units HE | 3 | 3,5 | 3.5 |
Construction dimensions centre drawer
With lock on one or both sides | |
![]() | ![]() |
A = panel height C = panel gap |
Panel height mm | |||
---|---|---|---|
Drawer side height | 60 mm | 92 mm | 115 mm |
Panel height A with panel gap 3 mm | 125 | 125 | 157 |
Min. number of height units HE | 2 | 2 | 2.5 |
Construction dimensions bottom drawer
With lock on one or both sides | |
![]() | ![]() |
A = panel height C = panel gap |
Panel height mm | |||
---|---|---|---|
Drawer side height | 60 mm | 92 mm | 115 mm |
Panel height A with panel gap 3 mm | 125 | 125 | 157 |
Min. number of height units HE | 2 | 2 | 2.5 |
Dimension from the screw-on position of the bottom drawer runner to the cabinet base panel must be at least 67.5 mm.
Note
Trial mounting is recommended for differing constructions. The interdependence between the series drilled holes, drawer runners and lock must then be observed during planning. The panel height must be designed at fixed intervals as with series drilled holes.
Filter
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Accessory Set, for Drawer Locking System, Häfele Matrix Box P
For lock on both sides For lock on both sides


Image may show a similar article, please check product details.
Note
Please select an article via the features or article table in order to add it to the basket.
