Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100

Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100
1 of 5
Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100
2 of 5
Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100
3 of 5
Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100
4 of 5
Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100
5 of 5
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Don't know your article number? Select product features below
See Required Products

344.21.000 250D Aximat 100 Hinge Full Screw Hospa

Screw fixing cup, Hospa screw fixing arm, 48/6

344.21.010 250D Aximat 100 Hinge Full Screw Euro

Screw fixing cup, pre-mounted Euro screw fixing arm, 48/6

344.21.020 Regu 250D Corner Hinge Sw Exp Axle

Arm fixing for press fitting with pre-mounted 5 mm spreading dowels, with exposed barrel –, Screw fixing cup, pre-mounted expanding dowels and screw fixing arm, 48/6

344.21.110 250D Aximat 100 Hinge Full PF Euro

Press fitting cup, pre-mounted Euro screw fixing arm, 48/6

Product details
  • LGA tested project quality in compliance with DIN EN 15570 test level 3 (80,000 cycles)
  • Large opening angle provided by external pivot point (axle)
  • Almost no loss of space inside the cabinet due to the flat design
  • Door installation with slide on (Aximat 100 A) or time saving quick fixing system (Aximat 100 SM)
  • 2 or 3-dimensional adjustment facility for optimum alignment of the gap pattern
  • Cabinet construction or continuous construction possible
  • With integrated automatic closing spring

Opening angle

250 °

Drilling pattern

48/6

Drilling depth

Hinge cup 11.5 mm

Mounting

Full overlay mounting
Side panel mounting

Installation

Hinge arm fixing into 32 mm series drilled holes

Material

Zinc alloy

Finish

Nickel plated
Product Features

Order reference

Order Hospa Ø 3.5 raised head screws separately for Hospa screw fixing versions

Complementary products and accessories
Manuals and Videos
  • Features
    • LGA tested project quality in compliance with DIN EN 15570 test level 3 (80,000 cycles)
    • Large opening angle from 180° to 270° provided by external pivot point (axle)
    • Almost no loss of space inside the cabinet due to the flat design
    • Door installation with slide on (Aximat 100 A) or time-saving quick fixing system (Aximat 100 SM)
    • Cup for screw fixing or press fitting, hinge arm fixing into 32 mm series drilled holes
    • 2 or 3-dimensional adjustment facility for optimum alignment of the gap pattern
    • Cabinet construction or continuous construction possible
    • With integrated spring
    • Optional accessories available, e.g. opening angle restraint
    • Also available in RAL colours on request
    Tested quality
     
     
     
     
     
     
    Flat designExternal axleAlso available in special colours
    Additional accessories available (e.g. opening angle restraint, cover plates)
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Number of concealed hinges per door

    The values in the diagram are sample measurements for doors up to 600 mm wide. Please inquire for doors wider than 600 mm.

    With doors under 400 mm wide the minimum gap must be determined by trial mounting.

    The door’s width should not exceed its height.

    The distance between hinges of doors with two hinges must be at least as long as the door is wide, if possible even longer.

    In case of heavy loads and high leverage force, an additional hinge mounted approx. 100 mm (dim. X) below the top hinge is recommended.

  • Installation dimensions and drilling patterns

    Aximat 100 SM

    Drilling pattern for cup fixing

    For screw fixing

    Drilling pattern for hinge arm fixing

    x = 59 (66) with drilling pattern 45/9.5 (52/9)Drilling pattern 45/9.5Drilling pattern 52/9Full overlay mountingInset mounting
    For press fitting
    Drilling pattern 45/9.5Drilling pattern 52/9

    Aximat 100 A

    Drilling pattern for cup fixing

    Drilling pattern for hinge arm fixing

    For screw fixingFor screw fixing with chipboard screws
    y = 62 (66) with drilling pattern 48/6 and 45/9.5 (52/5.5)Drilling pattern 48/6
    For press fittingFor screw fixing with Euro screws
    Drilling pattern 48/6
     
     
     
     
     

    Drilling pattern 45/9.5

    For press fitting with pre-mounted spreading dowels
    Drilling pattern 52/5.5
    Note

    Dowel holes must be chamfered with HPL coated boards in order to avoid damaging the dowels during press fitting.

  • Montage und Demontage der Tür

    Aximat 100 SM (Schnellmontage-Technik)

    Montage

    Topf auf den Gelenkarm schieben, bis er einrastet

    Sicherheitseinrichtung verriegeln, Abdeckkappe vom Topf schließen

    Demontage

    Sicherheitseinrichtungentriegeln

    Abdeckkappe öffnen undTopf vom Gelenkarm abziehen

     

    Aximat 100 A (Aufschiebe-Technik)

    Montage

    Topf auf den Gelenkarm schieben

    Schrauben festziehen

    Demontage

    Schraube lösen

    Topf vom Gelenkarm abziehen

     

    Einstellmöglichkeiten

    Über die 2- bzw. 3-dimensionalen Einstellmöglichkeiten können Verarbeitungs- und Montageabweichungen korrigiert werden.

    Seiten-, Höhen- und Tiefeneinstellungen sind ab Werk in der Nullposition eingestellt.

    A Seiteneinstellung

    B Höheneinstellung

    C Tiefeneinstellung

    Aximat 100 SM mit 3-dimensionaler Einstellmöglichkeit

    A –3 mm über Exzenter

    B ±2 mm über Exzenter

    C ±2,5 mm über Langlöcher

     

    Aximat 100 SM mit 2-dimensionaler Einstellmöglichkeit

    A –3 mm über Exzenter

    B ±2 mm über Langlöcher

    Aximat 100 SM FS mit 2-dimensionaler Einstellmöglichkeit

    A 2 mm über Exzenter

    B ± 2 mm über Exzenter

    Aximat 100 A mit 2-dimensionaler Einstellmöglichkeit

    A –3 mm über Langloch

    B ±2 mm über Langlöcher

     
  • Door width calculation

     

    Key

    LSB = internal cabinet width

    TA = door overlay

    TB = door width

    F = gap

    Cabinet with 1 door

    External cabinet width

    400 mm

    Side panel thickness 2 x 19 mm

    38 mm

    Internal cabinet width

    362 mm

    LSB + (2 x TA)

    =

    Door width

    Example

    362 mm + (2 x 16 mm)

    =

    392 mm

     
     
     
     
     
     
     
     

    Cabinet with double doors

    External cabinet width

    800 mm

    Side panel thickness 2 x 19 mm

    38 mm

    Internal cabinet width

    762 mm

    LSB + (2 x TA) – (1 x F)

    =

    Door width

    2

    Example

    762 mm + (2 x 16 mm) – (1 x 6 mm)

    =

    394 mm

    2

     
     
     
     
     
     
     
     

    Continuous construction with double doors

    External cabinet width

    800 mm

    Side panel thickness 1 x 19 mm

    19 mm

    Internal cabinet width

    781 mm

    LSB + (2 x TA) – (1 x F)

    =

    Door width

    2

    Example

    781 mm + (2 x 6.5 mm) – (1 x 6 mm)

    =

    394 mm

    2

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Important processing note on hinge arm fixing

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    * A third screw must be used for securing the hinge arm.

  • Technical documents available.
    Please select an article to view.
  • Catalogue links available.
    Please select an article to view.
19-Mar-2019

Exposed Axle Hinge, 250°, Full Overlay Mounting, Aximat 100

Arm fixing for screw fixing with pre-mounted Euro screws, with exposed barrel,

  • 2D adjustment

  • Full overlay mounting

Image may show a similar article, please check product details.

Note

Please select an article via the features or article table in order to add it to the basket.