Exposed Axle Hinge Arm, 180° Single Pivot, Screw Fixing, Aximat 300

Hinge arm

Art. no. 344.05.914

  • Features
    • LGA tested project quality in compliance with DIN EN 15570 test level 3 (80,000 cycles)
    • Large opening angle from 180° to 270° provided by external pivot point (axle)
    • Almost no loss of space inside the cabinet due to the flat design
    • Door installation with slide on (Aximat 100 A) or time-saving quick fixing system (Aximat 100 SM)
    • Cup for screw fixing or press fitting, hinge arm fixing into 32 mm series drilled holes
    • 2 or 3-dimensional adjustment facility for optimum alignment of the gap pattern
    • Cabinet construction or continuous construction possible
    • With integrated spring
    • Optional accessories available, e.g. opening angle restraint
    • Also available in RAL colours on request
    Tested quality
     
     
     
     
     
     
    Flat designExternal axleAlso available in special colours
    Additional accessories available (e.g. opening angle restraint, cover plates)
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Number of concealed hinges per door

    The values in the diagram are sample measurements for doors up to 600 mm wide. Please inquire for doors wider than 600 mm.

    With doors under 400 mm wide the minimum gap must be determined by trial mounting.

    The door’s width should not exceed its height.

    The distance between hinges of doors with two hinges must be at least as long as the door is wide, if possible even longer.

    In case of heavy loads and high leverage force, an additional hinge mounted approx. 100 mm (dim. X) below the top hinge is recommended.

    Hinge arm

    Art. no. 344.05.914

    Art. no. 344.05.914
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    PCMin 1
    See Required Products
    Article details
    • Particularly suitable for nursery or school furniture as small gap minimises the risk of finger entrapment
    • Tested in accordance with ANSI Grade 1 and DIN ISO standards
    • With catch
    • 3 mm gap
    • For inset doors

    Opening angle

    180 °

    Mounting

    For inset doors, 3 mm gap

    For door thickness

    16-21 mm

    Adjustment facility

    With 3 way adjustment: Lateral -3 mm. Vertical ±2 mm. Depth ±2 mm

    Model series

    Aximat 300

    Material

    Zinc alloy

    Finish

    Matt nickel plated
    Product Features

    Order reference

    Order Aximat 300 hinge cup separately

    Order Varianta Ø 5.0 mm countersunk and Hospa Ø 3.5 mm countersunk screws separately

    24-May-2019

    Exposed Axle Hinge Arm, 180° Single Pivot, Screw Fixing, Aximat 300

    Hinge arm

    Image may show a similar article, please check product details.

    Note

    Please select an article via the features or article table in order to add it to the basket.